The sinking material is the remaining material when the film is cleaned. The one-step equipment for sinking material developed by us can solve the problem of using the sinking material.
Order(MOQ):
1Payment:
30% TT deposit , 70% TT balanceProduct Origin:
ChinaShipping Port:
Nanjing portLead Time：
90 days
The bottom sinking material refers to the bottom sinking material when cleaning the film material. The composition of this material is complex (PP, PE, PS, ABS, PA, etc.). To use, first dry the material, mix, plasticize and modify it through the same direction parallel twin-screw, and then extrude it into the material storage cylinder through a single screw. Injection molding into the pressure mold to make the required products. It is also known as one-step extrusion and injection molding equipment.
Technicalparameters of GWJZS Injection&Extrusion Molding Machine (2 injection parts)
|
type |
Frequency(pcs/min) |
Press pressure |
Output (KG/H) |
Total Power (KW) |
Workpiece (length * width) |
Outside dimension (L*W*H) |
Weight (Ton) |
|
GWJZS-1 |
2-3 |
1500 |
350-450 |
366 |
1500*1300 |
14000*11000*6000 |
160 |
|
GWJZS-2 |
2.5-4 |
2000 |
450-550 |
450 |
1600*1400 |
16000*23000*7000 |
220 |
Double-stage Stretch Pelletizing Machine For Plastic Waste
Application: Used forrecycling and mixing granulation of PP, PE, PET, PS, ABS, PA, PVC, PC, POM, EVA, PMMA and other plastics.
Plastic Waste Granulator With Water
Application: It can also be used to produce PP, PE, PET, PS, ABS, PA and other plastics for recycling and mixing granulation.
Semi-automatic waste plastic mixing and pressing machine
In daily life, all kinds of waste plastics are everywhere, and how to use it is a difficult problem. Our company has developed semi-automatic extrusion molding equipment according to the current situation of different countries and regions. The characteristics of the equipment are simple process, convenient operation, small footprint, small investment, and can be produced locally or nearby. Waste plastic extrusion molding equipment is widely used, can be used as plastic pallets; plastic water channels; can be made into plastic bricks, plastic tiles, made into habitable houses;
Non-clean Film Aranulation And Extrusion Molding Equipment
The non-clean waste plastic film must be cleaned and squeezed to be used before it can be used to produce pallets, hoarding boxes and other products with an extrusion injection molding machine.
Mixed Plastic Waste Extrusion and Injection Molding Machine Manufacturer
008613913805568
admin@guowangeco.com
IPv6 network supported 